By Kate Westall
The wood floors usually with the passage of time develop scratches, indents, and nicks. The best way to restore the beauty of the wooden floors is to sand them.
The floors lose its elegance if it is worn out and is full of scratches. Therefore, it is always advisable to increase its longevity with sanding the floors. If the sanding is not done, then the dirt may get accumulated in between the gaps and gradually the scratch develops wider.
The wood floors require well maintenance, as it makes the house look more beautiful in comparison to other tiled floors. Various factors need to be considered if you have decided to sand the wooden floors. The selection is of prime importance. You have to determine the type of floor that you have.
If the floors are made of hardwood, then you may not require floor sander often.
In fact, such floors may not get the desired effect after sanding them. The quality of the floors matters like if it is a solid tongue and groove floor, then the requirement of sanding the floors multiple times become essential. These types of floors are designed in such a way that sanding is much needed to make it last longer. On the other hand, the engineered floor sander is a modern type of floor that has to be sanded once in a lifetime.
Benefits of floor buffer
The professionals sand the wood floors with great skill. The entire project in hand is completed with floor buffer. The professionals do this important task at the final stage of floor sanding. This is designed specially to create a perfect final coating. The floors are flattened in order to remove the imperfections that may be left after doing the sanders.
The drum floor sander or the belt floor sander leaves certain issues on the floors that need to be equaled by the professionals. However, the buffer has to be done meticulously or else it will spoil the previous good work as if undone. If proper care is not taken while doing the buffer, then it may lead to swirls and scratches creating a dull floor surface.
Therefore, it is important to choose the best pads and abrasives for buffer to achieve the best results. There are different steps that you can follow with buffer technique to achieve the perfect and desired results.
· The house has to be neat and tidy and there is no substitute for it. The floor buffer used for floors has to be taken good care. It has to be plugged properly to the ground. This has a great relation with the safety measure when the work is done. The dress that is worn is also for safety along with eye protection as well as respiratory devices. The buffers have to be kept clean so that the wheels do not have dust and grit on the tip of the buffer.
· The handling of the buffer correctly is a major point. The buffer has a handle and a motor that rotates clockwise. Hence, the holding of the machine is crucial for the accuracy of the job. On the other hand, the positioning of the buffer is equally important. The professionals are particular about holding it in a methodical, egg shaped, and sweeping motion.
The floor sander can even be done on your own. There is a maximum possibility to save money if you can handle the entire project. The inexperienced homeowner can do the job with perfection understanding the basics. The essential thing is that one should use a quality product and do the job with patience.