INSCMagazine: Get Social!

By Daisy Andrew

A particular industry often produces or manufactures some products, and each of them requires energy or heat, but it is seen that every different product requires different amount or intensity of energy for the production.

During the manufacturing process, often heat or energy is being passed through a particular viscous medium, and this whole procedure requires a mechanism that involves a machine known as the process heater. The heaters provide assurance of safety within the industry which efficiently controls the working environment within a factory or industry.

These heaters are highly used by most of the industries and are very popular because of their usefulness.

The process heaters are used for the purpose of maintaining the heat or energy within different types of liquids that are being used within the industry. Water, oil and different sorts of chemicals are used for production purposes and sustaining the heat within these liquids are often guarded by the process heaters.

Hence it is extremely helpful in all sorts of industries and is used mainly to avoid any sort of accident that may happen due to overheating of the chemicals or liquids. The process heaters also stabilize the gas used for manufacturing.

All the methods involved within the Industrial process heaters are carefully managed as any sort of mistake may invite hazardous outcome.

There are a few factors that involve in purchasing the suitable Industrial process heaters for a manufacturing industry and which can provide optimum usefulness without a glitch.

1. Based on different uses and amount of energy required for the heating purpose of various products you should choose the heaters accordingly. For this, you need to know whether:

I. The process heaters will be used for 24/7, or they need to be switched on as required and switched off when not in use.

II. The place where the process heater needs to be installed is important.

III. The material which needs to be heated and the procedure of heating.

2. The surrounding of the industries where the process heaters need to be installed should be kept in mind. You need to see whether the area is too hot or is extremely cold and the amount or density of pollution in the area.

3. Moreover, depending on the type of production, you need to either install the manual or the automated external process heaters. The manual heaters have switches or knobs to control the heat available just beside the process heaters whereas, in the external heaters, the heat is controlled from a different room automatically.

4. Depending on the heating time that a product will require, you need to buy accordingly.

5. Last but not the least the factor while choosing the process heaters is that whether it has an appropriate power supply voltage or not.

The advantages of Industrial Process Heaters are:

· Industrial process heaters involve low-cost heating processes for small and medium sized industries. It consumes low energy or electricity than any other heaters used in the factories.

· These heaters do not produce much noise when in use and hence they maintain a better environment both within and outside the industry. They prevent general noise pollution in the industrial areas.

· The heaters provide extreme safety to the industry, to the workers and the whole technique of heating. These heaters do not induce fire or flames during the heating method.

· These heaters use less space and hence can be installed in a small space within the industry.

· These heaters maintain the environment and thus help in controlling the pollution as these do not produce many flames from the chemicals or liquids.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.