To Protect and clean car’s rubber seals, always use a microfibre cloth, a hoover cleaner, a basin of soapy water and including a toothbrush. If you need to fight moss, take a commercial fungicide spray. First of all start by removing dirt from the joints and corners with the small brush placement of the hoover cleaner. Instead, you can do preliminary dusting with a dry microfibre cloth. Then rinse it in soapy water and wash the joints and corners. For less accessible areas and corners, or to remove immerse dirt, use a toothbrush. Then spray the anti-moss spray on the affected areas. Leave it for 3-4 days before brushing the joints and corners again. Once the rubber seals have been cleaned and freed of adulterant, protect them in fight of moisture, heat and frost with a silicone lubricant. Not only does this make sure a long life, but it keeps them watching their best all year round! click here
Your cars rubber seals strip plays an important role in making sure that the windows are watertight and that the doors and boot close in flow. Taking care of them is a assurance that your vehicle will always be welcoming and functional, that is why as pleasant to drive as it is to look at it!
Protecting your car’s rubber seals is essential for maintaining their integrity and preventing degradation over time. These are various effective ways to protect them:
- Rubber Conditioner: Use a rubber conditioner or protectant specifically formulated for automotive use. Apply it to the seals using a clean, soft cloth. These conditioners help moisturize the rubber, preventing it from drying out and cracking due to exposure to sunlight and other environmental elements.
2. Silicone Spray: Silicone-based sprays can also be used to protect rubber seals. They create a barrier against moisture and repel water, preventing the rubber from deteriorating. Apply the silicone spray evenly on the rubber seals and wipe off any excess to avoid a greasy residue.
3. Avoid Harsh Chemicals: When cleaning your car, avoid using harsh chemicals or cleaners on the car rubber seals. These can break down the rubber and cause it to degrade faster. Instead, use mild soap and water to clean the car rubber seals.
4. Regular Cleaning: Keep the rubber seals for car clean by regularly wiping them with a damp cloth. Removing dirt, grime, and debris can prevent buildup that might damage the seals over time.
5. UV Protection: Parking your car in shaded areas or using a car cover can protect the car rubber seals from prolonged exposure to sunlight and harmful UV rays. UV exposure can cause rubber to dry out and crack.
6. Avoid Exposure to Extreme Temperatures: Try to avoid extreme temperatures as much as possible. Prolonged exposure to extreme heat or cold can cause the rubber to deteriorate faster. If feasible, park your car in shaded areas or use sunshades to protect it from excessive heat.
7. Apply Petroleum Jelly: Applying a thin layer of petroleum jelly to rubber seals can also help maintain their flexibility and prevent them from drying out. However, use this method sparingly and ensure that excess jelly is wiped away.
8. Avoid Petroleum-Based Products: Avoid using petroleum-based products on car rubber seals as they can cause the rubber to deteriorate.
9. Gentle Handling: Be gentle when opening and closing doors and windows to prevent unnecessary strain on the car rubber seal strip. Rough handling can damage or displace the seals, leading to leaks or premature wear.
10. Inspection and Replacement: Periodically inspect the car rubber seals for any signs of damage or wear. Replace worn-out or damaged seals promptly to prevent further issues.
By incorporating these practices into your car maintenance routine, you can effectively protect the rubber seals, prolong their lifespan, and maintain the integrity of your vehicle.
MISTAKES TO AVOID WHEN CHANGING WINDOW SEALS
Few cars have plastic inserts in door that has pins. Without any actual lubrication, these pins are consume easily and are what creates the rubber loose. So, don’t forget to replace all these pins.
Many car rubber seals are in L-shaped and need to be settled with the higher surface facing in (this stop water from coming inside car).
Do not close the doors immediately after applying the car rubber seals. Give it at least an hour before taking out the car for a drive.
Do not use a screwdriver to press in the rubber. A windscreen fitter tool will do a impressive job, as it is easily fits between the frame and the rubber.
By follow these six steps you can easily restore your cars windows, doors car rubber seal without paying hundreds of dollars. The Specialist silicone lubricant will help to keep the rubber in place and protect it from dust. With a single coat of this lubricant, you don’t need to worry about any repayment for six months