Clogged drains and pipes can be a somewhat common occurrence and it is better to fix them early and prevent them from becoming a problem. Clogged drains are the result of a foreign object getting stuck in a drainpipe if you can’t find the debris fast enough then the water will block up and it could make for a messy situation.
Kitchen drains might bring some different challenges than a clogged bathroom sink because of the nature of what goes into the drain. Sometimes the chemicals that you use to clear the clog can cause damage to the pipes as they may simply move the clog further down, which can eventually cause a larger backup.
Look at the below-mentioned points and try helping yourself with the best suitable option and get rid of clogged bathtub drains. Here are the 5 tips that can be useful:
- Use Hot Water
To deal with a slightly clogged drain remove as much standing water from the sink as possible and then pour an entire pot of boiling or hot water down the drain. This will often help dissolve the barrier or any organic matter through the pipes and clear the drains. It is one of the easiest and inexpensive ways to fix a clog. One can even pour some salt before the boiling water down the drain if simply the hot water is not working. Beware to use boiling water if you have PVC pipes, as the heat could damage the joints and if there is a porcelain sink bowl it can give a crack to the bowl.
- Combination of Baking soda + vinegar
A combination of baking soda and vinegar is also another alternative home remedy to deal with simple clogging of drains. You can flush this mixture down the drain so it can work on the obstruction and wash away the residue. It is effective for minimal sink clogs. You need to use half a box of baking soda down your drain without adding any water and then pour half a cup of vinegar down the sink and then stop up the drain with a metal stopper. It will create a volcanic effect and then run hot water to see if the clog is cleared.
- Plunger to clear your sink
A plunger can be a quick solution to drain the clogs, you just need to position the plastic cup over the drain and start pushing it. For a sink with a larger obstruction, you need to use a plunger but make sure you have the right kind of plunger: cup-shaped, not flanged, is what you want for a sink. Start by filling halfway full with water in the sink and then place the plunger over the drain. Always try to cover the drain on the opposite side if you have a double basin or the pressure will cause water or debris to spray up the other drain.
- Seek the Help of professionals
The solution to clogged drains is often a quick and painless process that most people can manage on their own. But many a time there are situations where you a helping hand from professionals. For employing an entire relining for clearing the clogs, you can rely on professionals such as The Relining Company.
- Using a P-trap for cleaning
A P-trap is at the curve of the sink’s drainpipe which you need to unfasten from the drainpipe, clean it out and then position it back in place. It normally has a nut on either end that is easy to twist off, so make sure to place a bucket underneath the P-trap before removing it.
- Use of Plumber’s snake
A long-shaped wire that you stick down a drain and with which you can push or pull the blockage out of the way called plumbers snake. It is a very simple tool that can be twisted to catch and remove debris. Even the steel wire design allows it to bend around most pipes easily and deal with clogs immediately.
But sometimes in large plumbing problems, you require professional expertise; to encounter anything unexpected, so be sure to contact them as with their expertise you can restore your property and get your home back to normal.